China Factory Price Galvanized Welded Wire Mesh Welded Wire Mesh Panel

China Factory Price Galvanized Welded Wire Mesh   Welded Wire Mesh Panel

Welded wire mesh

Welded wire mesh is made with two orthogonal wires that are joined with each other at their intersections employing a resistance welding method to form a grid. The line wires of the grid are guided via the welder utilizing a pattern board. The machine drops cross wires into location and fuses them jointly to develop the two distinctive planes that kind welded wire mesh.

Line wires (also known as extended wires) are laid out on a pattern board to established the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped one particular at a time on to the line wires. Then, the cross wires are resistance welded into location placing the panel length spacing. The panel advances right after the weld and the method starts over yet again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the centre of two wires (Heart to Heart) or by measuring the opening between two wires (Distinct Opening). We can manufacture regular and custom made welded wire mesh with a sq. mesh spacing range from one” to as big as might be needed.  Rectangular mesh spacing ranges from one/2″ x up to as extended as may possibly be necessary.

Edge Circumstances
 Welded Wire Mesh has two normal edge situations: trimmed and untrimmed.

Depth specification:
Content: low carbon steel wire, galvanized wire ,stainless metal wire
Area dealing : black welded wire mesh,
electro galvanized ahead of welded wire mesh,
Electro galvanized following welded wire mesh
scorching-dipped galvanized prior to welded wire mesh
Sizzling-dipped galvanized after welding wire mesh
PVC-coated welded wire mesh
Power coated welded wire mesh
Wire diameter: .45mm to 12.0mm
Hole dimension: 1/3″ to 150 mm hole
Gap form: sq. gap, rectangular hole
Width: .3M to two.0M
Packing : in roll or in panel

please be aware, we can weave speical wire diameter welded wire mesh this kind of as 1/4″X1.1mm, 1/2″X1.4mm and so on on your requirement 

Welded wire mesh Specification:

Open in inch Opening in (mm) Wire diameter
one/four” x one/4″
six.4mm x six.4mm
three/8″ x three/8″
10.6mm x ten.6mm
1/2″ x 1/2″
twelve.7mm x 12.7mm
five/eight” x five/eight”
16mm x 16mm
three/four” x three/4″
19.1mm x 19.1mm
one” x one/two”
twenty five.4mm x 12.7mm
1-one/2″ x one-1/2″
38mm x 38mm
1″ x 2″
25.4mm x fifty.8mm
2″ x two”
fifty.8mm x 50.8mm
two” x 3″
50mm x 75mm
three” x 3″
75mm x 75mm
two” x four”
50mm x 100mm
two.11mm,two.5mm, 3.0mm, four.0mm
four” x four”
100mm x 100mm
2.0mm,2.5mm, 3.0mm, 4.0mm
CZPT Observe:
one,CZPT roll size:20- 30mwidth: .5m to 1.8m
two,Specific dimensions CZPT at request
three,Packing: in watertight paper in rolls. CZPT packing CZPT at request.


China Factory Price Galvanized Welded Wire Mesh   Welded Wire Mesh Panel